> For the complete documentation index, see [llms.txt](https://doc.some3c.com/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://doc.some3c.com/panda-classic/lan-mode-connection.md).

# LAN Mode Connection

1. OTG& USB dual-mode chassis supports both USB screen projection and LAN cable screen projection
2. [First set the chassis to USB connection mode](https://doc.some3c.com/panda-manual/usb-connect-phone#id-1.usb-connection)
3. Connect the computer host with a USB cable and successfully project the screen
4. And use a network cable to connect the chassis to the router, which must be the same router as the computer..
5. Select all phones Find the Panda Classic Edition "Open Wireless Adb"

<figure><img src="/files/leOC8owdNrNpgUbFlgIt" alt=""><figcaption></figcaption></figure>

6. After clicking "Open wireless Adb", manually press double-click. (A6/A8 chassis only requires a click)the chassis button

<figure><img src="/files/TS5grk2wx6nykaCy4e8j" alt=""><figcaption></figcaption></figure>

7.Then click 'Scan WiFi', enter the local IP range, port 5555, click save, then click scan

<figure><img src="/files/Ykrz4uHWl19jdKylUreR" alt=""><figcaption></figcaption></figure>